AF25 Technical specifications
Machine
X,Y travels 400 x 300 mm
15.7 x 11.8 inch
U,V travels 120 x 120 mm
4.7 x 4.7 inch
Z travel 250 mm
9.8 inch
Maximum workpiece dimensions 700 x 650 x 250 mm
27.6 x 25.6 x 9.8 inch
Maximum workpiece weight 700 kg
1556 lbs
Maximum taper angle 30º / 87 mm
27º / 100 mm
Machine weight 3000 kg
6667 lbs
Machine height 2230 mm
87.8 inch
Total surface required 2320 x 2550 mm
91.3 x 100.4 inch
Wire circuit
Standard wire diameters 0.15 to 0.33 mm
0.006 to 0.013 inch
Optional wire diameters 0.10 mm
0.004 inch
Wire guides closed-type, diamond
Wire spool up to 16 (DIN 200) kg
up to 35.6 (DIN 200) lbs
Min. diameter of threading hole 0.5 mm
0.019 inch
Automatic wire threader standard
Wire chopper optional
Dielectric
Paper cartridges 2 units
Dielectric capacity 700 l
184.7 gallons
ONA’s patented mineral filter optional
Chiller optional
CNC
Number of axes simultaneously controlled X,Y,U,V,B
Least input increment 0.001 mm
Screen 15” TFT colour
Keyboard flat, antidust
RAM memory 256 MB
Generator
Standard power supply 380 or 400 V
50 or 60 Hz
Max. cutting speed (0.30 Xcc) 360 mm2/min
33.5 inch2/h
Up to 6 axes control with 5 axes simultaneously.
Digital generator ONA EASYCUT provides a 100% electrolysis free cutting without compromising the cutting speed.
A perfect combination of robustness, high cutting-rate, accuracy and cost-effective.
Reliable and low maintenance cost.
Automatic strategy makes high-level programming a very simple task.
Unattended operation with auto-threading and auto-messaging to PC and Mobile.
6 axes control with 5 axes simultaneously.
High level automation in cycled measurement, remote monitoring and control.
Precise and automatic solutions and strategies make the complex programming mission a simple task.
Positioning accuracy: 0.001mm.
EES (Expert Erosion System) automatically modify programmed parameters of power generator and ensure the optimum performance in each stage.
SPC (Start Point Control).
Auto-move to next cut-position.
Auto-message to PC and Mobile.
Maximum productivity and excellent surface finish.
100% electrolysis cutting without compromising cutting speed, up to 450 mm2/minute.
Surface integrity 100% reserved.
Best surface finish: Ra 0.2 µm (6 VDI).
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
