主要配置與性能
Main configuration and performance
1.高頻調壓采用模塊鎖相環數字脈沖觸發電路，三相不平衡度小于0.4%。
2.回路采用晶閘管模塊組件，不通水、體積小、可靠性高。
3.燈絲供電采用恒壓器，穩壓精度高，壽命長，節能顯著。
4.燈絲柵極風冷式，隔直流采用大容量、高耐壓云母電容。
5.整流變壓器采用低損耗變壓器。
6.輸出變壓器具有二維調節功能，感應器與工件相對位置調整極為方便。
7.設備具有過電壓、過電流、欠水壓保護功能。
8.控制回路具有軟啟動、穩壓功能。
9.與數控淬火機床、內循環冷卻系統組成成套設備，自動化程度極高，控制精
度及零件熱處理一致性和合格率高。
10.設備一鍵開機，一檔預熱、二檔預熱、加熱自動程序進行。
11.設備構件防銹、防磁。
12.儀表顯示數字化可智能化控制。
1.Voltage regulating with high frequency adopts modular phase-locked digital pulse trigger circuit.Unbalance degree of three-phase is lower
than 0.4%.
2.Main circuit adopts thyristor modular. Water doesn’t go through it. It has small volume and high reliability.
3.Electric supply of filament adopts constant voltage device, which has high voltage stabilizing accuracy, long life and distinct energy-saving
efficiency.
4.Filament rid adopts air-cooling. Blocking adopts large capacity and high voltage resistance mica condenser.
5.Rectifying transformer is low consumption transformer.
6.Output transformer has 2-dimensional regulating function, which makes center alignment of inductor and workpiece be easy.
7.This generator also has functions as over voltage, over current and protecting water pressure lacking.
8.Control circuit has functions as soft starting and voltage stabilizing.
9.Numerically-controlled hardening machine, inner circular cooling system and this generator constitute complete installation, which has high
automaticity, high control precision, high consistency of component heat-treating and high percent of pass.
10. One-key start-up function, the procedures of 1st preheat option, 2nd preheat option and auto heating are running.
11. The components are made of anti-rust and anti-magnetic materials.
12. The instrument display enables digital and intelligent control.
| 序號No. | 產品型號Name | 振蕩功率Oscillating PowerkW | 輸出功率 Output Powe kW |
振蕩頻率 Oscillating Frequency kHZ |
電源輸 入容量 Input Power kVA |
重量Weight kg | 外形尺寸 (長×寬×高)Dimension(L×W×H) mm×mm×mm |
| 1 | GGCZ25-4A | 30 | 25 | 350-450 | 50 | 700 | 1800×1000×1700 |
| 2 | GGCZ50-2 | 60 | 50 | 200-250 | 100 | 1000 | 主機 Generator 1800×700×1700 |
| 3 | GGCZ80-2A | 100 | 80 | 200-250 | 160 | 2500 | 主機 Generator 2100×800×1900 |
| 4 | GGCZ150-2 | 200 | 150 | 200-250 | 320 | 2700 | 主機 Generator 2400×1500×2000 |
| 5 | GGCZ300-2 | 400 | 300 | 200-250 | 630 | 3500 | 主機 Generator 2400×1500×2000 |
| 6 | GGCZ600-2 | 800 | 600 | 200-400 | 1250 | 5000 | 主機 Generator 2400×2000×2000 |
| 7 | GGCZ800-2 | 1000 | 800 | 200-400 | 1600 | 5500 | 主機 Generator 2400×2000×2000 |
| 8 | GGCZ25-0.3 | 30 | 25 | 30-50 | 50 | 750 | 1800×1000×1700 |
| 9 | GGCZ50-0.3 | 60 | 50 | 30-50 | 100 | 1500 | 主機 Generator 1800×1000×1700 |
| 10 | GGCZ80-0.3 | 100 | 80 | 30-50 | 160 | 3500 | 主機 Generator 2100×860×1900 |
| 11 | GGCZ150-0.3 | 200 | 150 | 30-40 | 320 | 3200 | 主機 Generator 2000×1200×2000 |
| 12 | GGCZ300-0.3 | 400 | 300 | 30-40 | 630 | 3800 | 主機 Generator 2400×1400×2000 |
| 13 | GGCZ25-0.3/4 | 30 | 25 |
雙音頻
30-50
350-450 |
50 | 800 | 主機 Generator 1800×1000×1900 |
| 14 | GGCZ50-0.3/2 | 60 | 50 |
雙音頻
30-50
200-250 |
100 | 2000 | 主機 Generator 1800×1000×1900 |
| 15 | GGCZ80-0.3/2 | 100 | 80 |
雙音頻
30-50
200-250 |
100 | 3200 | 主機 Generator 1600×1600×2000 |
| 16 | GGCZ150-0.3/2 | 200 | 150 |
雙音頻
30-50
200-250 |
320 | 3500 | 主機 Generator 2400×2400×2000 |
| 17 | GGCZ300-0.3/2 | 400 | 300 |
雙音頻
30-50
200-250 |
630 | 4000 | 主機 Generator 2400×2400×200 |
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
