| |
- SPECIFICATIONS
- APPLICATIONS
SPECIFICATIONS
| MODEL |
Turn-Mill LK Series |
| Maximum cutting diameter |
950mm |
| Center height |
575mm |
| Between centers |
4000 – 8000 mm |
| Control |
FANUC 0i-TD / Siemsns 840D |
| Type of carriage bed ways |
2 box type bed ways |
| Type of cross slide bed ways |
2 box type bed ways |
| Type of tailstock bed ways |
2 flat and 1 V ways |
| Machine length |
8200/9200/10200/11200/12200 mm |
| HEADSTOCK |
|
| Spindle bore |
153mm |
230mm |
305mm |
| Spindle nose |
A2-11 |
A2-15 |
A2-20 |
| Spindle speed |
9-600 rpm |
9-450 rpm |
7-400 rpm |
| Spindle centre |
MT#5 |
| Spindle motor |
22/26 Kw(STD) / 30/37 Kw (OPT) |
| Sub spindle |
|
| Sub spindle interface |
BT-50 |
| Motor of sub spindle |
Fanuc αP16/6000 i 7.5/9 Kw |
| Transmission |
Through 1:4 dual speed planetary gear reducer and 1:1.15 Timely belt |
| Y-axis servo motor |
Fanuc α12/3000 i / 4 Kw |
| Y-axis ball screw |
φ40mm, pitch 5 mm |
| Y-axis stroke |
170mm(up 120mm, down 50mm) |
| Y-axis rapid traverse |
5000mm/min |
| ATC (Tool magazing) |
|
| Tool holder type |
BT-50 |
| Tool number |
20 |
| Power |
Electric |
| Time of tool change |
3.17 second (60HZ without delay) |
| Maximum tool holder weight |
25 Kg |
| Maximum tool holder length |
260 mm |
| Maximum tool holder diameter |
110mm full tool)
200mm (Next one is smpty |
| TAILSTOCK |
|
| Tailstock quill diameter |
200mm rotatory type |
| Tailstock quill movement |
Motorized / Handwheel 2 ways could be switched |
| Tailstock quill stroke |
250mm |
| Tailstock body movement |
Motorized (Pinion and rack) |
| Tailstock center |
MT#6 |
| Transmission and feed |
|
| X-axis servo motor |
Fanuc α22/3000 i / 4 Kw |
| X-axis ball screw |
φ40mm, pitch 5mm (Through coupling) |
| X-axis stroke |
480mm |
| X-axis rapid traverse |
5000mm/min |
| Z-axis servo motor |
Fanuc α30/3000 i / 7 Kw (Nut rotating type) |
| Z-axis ball screw |
φ80mm, pitch 10 mm |
| Z-axis stroke |
4000 / 5000/ 6000 / 7000 / 8000 mm |
| Z-axis rapid traverse |
5000mm/min |
| C-axis servo motor |
Fanuc α30/3000 i / 7 Kw |
| C-axis trasmission |
Through 1:60 planetary precise gear reducer |
| C-axis indexing degree |
360 degree random degree |
| Coolant pump |
High pressure 15 Bar |
| Hydraulic pump |
3 HP |
| Chip removing system |
Front and rear chip conveyors |
| Guarding type |
Rear splash guard and front 2 doors(STD) |
|
|
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
添加為商業伙伴
