| 結構特點： | ||||
| 1、立柱：寬型設計和剛性十足的可對應重磨削的立柱，采用了雙層壁構造 | ||||
| Post:The post of double-wall structure with high width and sufficient rigidity can be re-ground | ||||
| 2、砂輪軸：采用了超精密向心止推滾柱軸承的圓筒形高性能單元組件式砂輪軸，扭力大，耐重成型切削，采用持久潤滑脂密封，無需進行保養 | ||||
| Grinding wheel axis:The cylindrical modular grinding wheel axis with extra-precise radial thrust bearing has large torque,good resistance against formation and grinding,permanent lubricating seals for no need of maintenance | ||||
| 3、進給導向面：前后的導向，V-V型結構擴大跨距，蜂巢中空結構抗變形能力強，精度恒定持久 | ||||
| Feeding guide face:longitudinal guide based on V-Vstructure to expand span,the hollow structure of honeycomb is resistant against deformation,permanent and constant in accuracy | ||||
| 4、前后進給手柄：由滾珠螺桿和高精度液壓電機構成可靠的驅動構造，配有安全機構，保證在自動進給過程中手動手柄無法轉動，通過手柄的單次操作可進行手動 | ||||
| Longitudinal feed handle:The drive structure is reliable and composed of ball screw and highly accurate hydraulic motor.It is equipped with safety gears to ensure that the handle cannot rotate during automatic feeding,the handle can be manually operated by single operation. | ||||
| 5、構架/滑動座架/工作臺：充分保持了框架同幅度、滑動座架幅度，工作臺的伸出部分控制在最小程度，實現全支撐抗變形能力強 | ||||
| Frame/sliding saddle/table:The extent of frame and extend of sliding saddle are fully maintained,theextension of table is minimized to provide full support and good resistance against deformation. | ||||
| 6、自由落差式自動潤滑：采用的是被推壓到立柱上部的潤滑油根據落差自動的向各異向面進行供油的方式。液壓自然的保持穩定，導向面的油膜厚度也一直保持均勻 | ||||
| Free-fall automatic lubricating:The lubricant pushed to the top of the post is supplied to every surface by free fall.The hydraulic pressure is constant ang stable,the oil membrane on guiding face remains even. | ||||
| 技術參數： | ||||
| 項 目 | 單位 | ZHM-618M | ||
| 尺寸 | 工作臺面尺寸（長×寬） | mm | 450×150 | |
| 工作臺移動量（手動：左右×前后） | 465×160 | |||
| 工作臺面至砂輪下面的距離 | 357.5 | |||
| 可安裝標準磁臺的尺寸（長×寬×高） | 350×150 | |||
| 加工工件最大重量（含磁臺） | kg | 60 | ||
| 工作臺 | T型槽尺寸×槽數 | mm×No | 17×1 | |
| 左右進給速度（平均） | m/min | / | ||
| 手輪每轉進給量 | mm | / | ||
| 前后手動進給 | 手輪旋轉1周進給量 | mm | 5 | |
| 刻度盤1刻度進給量 | mm | 0.02 | ||
| 前后自動進給 | 間歇進給 | mm | / | |
| 連續進給速度 | m/min | / | ||
| 砂輪頭 | 自動切入進給量（縱橫＆橫磨） | mm | / | |
| 手動進給 | 手輪旋轉1周進給量（×0.1/×1/×10） | 1 | ||
| 刻度盤1刻度進給量（×0.1/×1/×10） | 0.005 | |||
| 無火花磨削 | 次 | / | ||
| 上下速進速度 | mm/min | / | ||
| 砂輪 | 外徑（50/60HZ）×寬×內徑 | mm | ø180×13×ø31.75 | |
| 轉速（50/60HZ） | RPM | 3000/3600 | ||
| 馬達 | 主軸馬達 | KW/P | 1.1/1.5 | |
| 液壓馬達 | ||||
| 上下伺服馬達 | KW | |||
| 電源 | 電源容量（含特別附帶的卡盤、注入裝置） | KVA | 2 | |
| 外形尺寸 | 寬×深×高 | mm | 1675×1214×1968 | |
| 機床重量 | 凈重 | kg | 880 | |
| STANDARD ACCESSORIES/標準附件 | ||||
| 附件名稱 | 數量 | 單位 | ||
| 砂輪（直徑*厚度*孔徑）GRINDING(dia.*width*bore)180*13*31.75mm | 1 | 片/PCS | ||
| 砂輪法蘭及撥取螺母/FLANGE | 1 | 組/SET | ||
| 砂輪平衡棒/BALANCE BAR | 1 | 支/PCS | ||
| 鉆石修整座及鉆石筆/DIAMOND DRESSER WITH A BASE | 各1 | 個/PCS | ||
| 水平調整螺絲及基礎座/LEVELLING SCREWS WITH BLOCKS | 5 | 組/SET | ||
| 吊鉤/EYE RING | 4 | 支/PCS | ||
| 工具箱及必要工具/TOOL BOX WITH ADJUSTING TOOLS | 1 | 組/SET | ||
| 潤滑油/LUBRICATING OIL | 2.5 | 公升/L | ||
| 石英燈/HALOGEN LAMP | 1 | 盞/PCS | ||
| 使用說明書/OPERATION MANUAL | 1 | 份/COPY | ||
| OPTIONAL ACCESSORIES 特殊附件 | ||||
| Dust Suction System/吸塵裝置 | ||||
| Coolant System come with Magenetic Dsut Separator/吸塵注水裝置 | ||||
| Gringding wheel Balancing Apparatus/砂輪平衡裝置附平衡棒 | ||||
| Magnetic Chuck Permanent or Electro/電磁臺-永磁或電磁 | ||||
| Dverhead Dresser-Manual/手動上砂輪修整裝置 | ||||
| Digilal Readoul for Cross/Vertical Axis/光學尺 | ||||
| Spindle Speed Inverter/砂輪軸變頻器 | ||||
| Spare Wheel Adaptor/備用砂輪法蘭 | ||||
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
